Electronic Suspension Front Position Sensor Replacement. Buick Regal 2009

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2009 🢒 Regal 🢒 Suspension 🢒 Electronic Suspension Control 🢒 Electronic Suspension Front Position Sensor Replacement

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the front tire and wheel assemblies.
1	Electronic Suspension Front Position Sensor Fastener Caution: Refer to Fastener Caution in the Preface section. Tighten 9N·m (80 lb in)
2	Electronic Suspension Front Position Sensor Procedure Remove the connector from the strut. Disconnect the connector from the sensor, the connector has a secondary locking mechanism that should be released before turning and releasing the connector.

Callout

Component Name

Electronic Suspension Front Position Sensor Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9N·m (80 lb in)

Electronic Suspension Front Position Sensor

Remove the connector from the strut.
Disconnect the connector from the sensor, the connector has a secondary locking mechanism that should be released before turning and releasing the connector.