Tools Required

J 38778 Door Trim Pad Clip Remover

1. Open the rear compartment.
2. If equipped, remove the rear compartment convenience net.
3. If equipped, remove the rear compartment convenience net retainers.
4. If equipped, remove the communication interface module. Refer to Communication Interface Module Replacement in Cellular Communication.
5. Remove the seat back. Refer to Rear Seat Back Replacement in Seats.
6. If non-folding rear seat back, remove the child seat belt bracket. Refer to Child Seat Restraint System Belt Bracket Replacement in Seat Belts.
7. On non-folding rear seats, reposition the quarter panel lower trim to enable the sound barrier to be repositioned.
8. On non-folding seats, reposition the sound barrier to access the trim panel retainers.



9. Use J 38778 to remove the push-in retainers from the trim panels.
10. Slide the panels off the metal supports.



11. Remove the spare tire cover from the rear compartment.
12. Remove the spare tire.
13. Use J 38778 to remove the push-in retainers located near the lock striker.
14. Slide the trim panels out from under the weatherstrip.
15. Slide each side of the rear compartment trim panels toward the center of the car.
16. Remove the trim panels from the rear compartment.

Important: The right side of the rear compartment trim panel fits over the left side.

1. Position the trim panels in the rear compartment.
2. Install the push-in retainers located by the lock striker.
3. Replace the rear compartment convenience net retainers, if equipped.
4. Install the rear compartment convenience net, if equipped.



5. Install the spare tire. Install the spare tire cover to the rear compartment.
6. Position the trim panels on the metal supports by the rear seat back.



7. Install the push-in retainers.
8. Return the sound barrier to the installed position.
9. Return the quarter lower trim panel to its installed position.
10. If non-folding rear seat back, install the child seat belt bracket. Refer to Child Seat Restraint System Belt Bracket Replacement in Seat Belts.
11. Install the seat back. Refer to Rear Seat Back Replacement in Seats.
12. If equipped, install the communication interface module. Refer to Communication Interface Module Replacement in Cellular Communication.
13. Close the rear compartment.