Low Traction Indicator Inoperative. Buick Regal 1998

For 1990-2009 cars only

Makes 🢒 Buick 🢒 1998 🢒 Regal 🢒 Brakes 🢒 Antilock Brake System 🢒 Low Traction Indicator Inoperative

ABS Components
Antilock Brake System Schematics
Handling ESD Sensitive Parts Notice

Circuit Description

This symptom table checks the state of the LOW TRACK Indicator Inoperative to identify a situation in which the driver could not be warned of a system malfunction by the LOW TRAC Indicator Inoperative, or the LOW TRAC Indicator Inoperative is always ON. The EBTCM sends a message to the electronic instrument panel cluster (IPC) via the Serial Data Line and the IPC will illuminate the indicator lamp(s).

Diagnostic Aids

The lamp test function of the scan tool may be used to command the indicator ON while looking for an intermittent malfunction in the LOW TRAC Indicator Inoperative.

Step	Action	Value(s)	Yes	No
1	Was the Diagnostic System Check performed?	--	Go to Step 2	Go to Diagnostic System Check
2	Turn the ignition switch to the OFF position. Install a Scan Tool . Turn the ignition switch to the RUN position. Use the Scan Tool in order to select OUTPUT CONTROLS. Use the Scan Tool in order to select WOW CLUSTER. Use the Scan Tool in order to turn the amber LOW TRAC on. Did the amber LOW TRAC indicator turn on?	--	Go to Step 4	Go to Step 3
3	Repair the instrument panel cluster. Refer to Instrument Cluster, Cell 81, in Electrical Diagnosis. Is the repair complete?	--	Go to Diagnostic System Check	--
4	The malfunction is not present at this time. Is the repair complete?	--	Go to Diagnostic Aids	--