GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rainier - 2WD 🢒 Body 🢒 Exterior Trim 🢒 Rocker Panel Rear Molding Replacement

Removal Procedures

    Object Number: 831869 Size: SH
  1. Remove rocker panel assembly. Refer to Rocker Panel Molding Replacement .
  2. Remove the door opening screws (1) from front of rocker panel rear molding.
  3. Release push-in retainers (2) using a trim removal tool.

    4. Notice: Use a plastic, flat-bladed tool to prevent paint damage when removing an emblem/name plate.

  4. Remove the rocker panel molding from the rocker panel.

Installation Procedure

    Object Number: 831869 Size: SH
  1. Position the rocker molding to the holes in the rocker panel.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the door opening screws (1).

    3. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  3. Install push-in retainers.