GM Service Manual Online
For 1990-2009 cars only

Rear Side Door Outside Handle Replacement TrailBlazer EXT, Envoy XL

Removal Procedure


    Object Number: 800135  Size: SH
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Release the clip (1) retaining the lock rod (2) to the outside door handle.
  4. Remove the lock rod (2) from the outside door handle.
  5. Remove the nuts retaining the outside door handle to the door.
  6. Remove the outside door handle from the door.

Installation Procedure


    Object Number: 800135  Size: SH
  1. Install the outside door handle to the door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the nuts retaining the outside door handle to the door.
  4. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  5. Install the lock rod (2) to the outside door handle.
  6. Install the clip (1) retaining the lock rod (2) to the outside door handle.
  7. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  8. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .

Rear Side Door Outside Handle Replacement TrailBlazer, Envoy

Removal Procedure

  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .

  3. Object Number: 723030  Size: SH
  4. Release the clip that retains the lock rod to the handle.
  5. Remove the lock rod from the handle.
  6. Remove the nut that retains the handle and bracket to the door.
  7. Remove the bracket from the handle.
  8. Remove the handle from the door.

Installation Procedure


    Object Number: 723030  Size: SH
  1. Install the handle to the door.
  2. Install the bracket to the handle.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the nut that retains the handle to the bracket.
  5. Tighten
    Tighten the nut to 10 N·m (89 lb in).

  6. Install the lock rod to the handle.
  7. Install the clip that retains the lock rod to the handle.
  8. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  9. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .