GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2004 🢒 Rainier 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure

    Object Number: 1257519 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the stabilizer shaft insulator clamp mounting bolts.
  3. Remove the stabilizer shaft insulator clamp from the stabilizer shaft insulator.
  4. Lower the stabilizer shaft and remove the stabilizer shaft insulator.

Installation Procedure

    Object Number: 1257519 Size: SH
  1. Install the stabilizer shaft insulator to stabilizer shaft with slit facing the front of the vehicle.
  2. Install the stabilizer shaft insulator clamp to the stabilizer shaft insulator.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer shaft insulator clamp mounting bolts.

    4. Tighten
    Tighten the stabilizer shaft insulator clamp mounting bolts to 54 N·m (40 lb ft).

  4. Lower the vehicle.