GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2004 🢒 Rainier 🢒 Engine 🢒 Engine Mechanical - 4.2L 🢒 Exhaust Manifold Installation

    Object Number: 637622 Size: SH
  1. Install the exhaust manifold gasket.

    2. Object Number: 637625 Size: SH
  2. Install the exhaust manifold.
  3. Add threadlock GM P/N 12345493, Canadian P/N 10953488 to the exhaust manifold bolt threads.
  4. Install the exhaust manifold bolts.

    5. Object Number: 715596 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Tighten the exhaust manifold bolts.

    6. Tighten

    1. Tighten the exhaust manifold bolts a first pass in sequence to 20 N·m (15 lb ft).
    2. Tighten the exhaust manifold bolts a second pass in sequence to 20 N·m (15 lb ft).
    3. Tighten the exhaust manifold bolts a final pass in sequence to 20 N·m (15 lb ft).

    Object Number: 637627 Size: SH
  6. Install the exhaust manifold heat shield studs (if required).

    7. Tighten
    Tighten the exhaust manifold heat shield studs to 10 N·m (89 lb in).


    Object Number: 637629 Size: SH
  7. Install the exhaust manifold heat shield.
  8. Add anti-seize GM P/N 12371386, Canadian P/N 993128 to the exhaust manifold heat shield nuts.
  9. Install the exhaust manifold heat shield nuts.

    10. Tighten
    Tighten the exhaust manifold heat shield nuts to 10 N·m (89 lb in).