GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

The front inside door handle bezel has electrical connector. The rear does not.


    Object Number: 541051  Size: SH
  1. Insert a flat-bladed tool behind the forward edge of the door handle bezel.
  2. Gently pry the bezel away from the door trim panel.

  3. Object Number: 541052  Size: SH
  4. Pull the door handle about half way open.
  5. Pull the bezel forward over the inside door handle.
  6. Disconnect the electrical connector.

Installation Procedure


    Object Number: 541052  Size: SH
  1. Connect the electrical connectors, if any, to the inside door handle bezel.
  2. Pull the door handle about half way open.
  3. Slide the inside door handle through the opening in the door handle bezel.
  4. Insert the tabs at the rear of the bezel behind the door trim panel.
  5. Snap the front of the door handle bezel into place.