Step | Action | Yes | No | ||||
|---|---|---|---|---|---|---|---|
1 | Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections? | Go to Step 2 | |||||
2 | Verify that the steering column tilt function is inoperative. Does the steering column tilt function operate normally? | System OK | Go to Step 3 | ||||
3 | Verify that the following components are not seized or corroded:
Are the components seized or corroded? | Go to Step 7 | Go to Step 4 | ||||
4 | Inspect the tilt pivot pins for binding. Are the tilt pivot pins binding? | Go to Step 8 | Go to Step 5 | ||||
5 | Inspect for a weak or broken steering column tilt spring. Is the steering column tilt spring weak or broken? | Go to Step 9 | Go to Step 6 | ||||
6 | Inspect the steering column wiring harness routing for tightness. Was the steering column wiring harness routed correctly? | Go to Step 11 | Go to Step 10 | ||||
7 | Replace the steering column. Refer to Steering Column Replacement . Did you complete the repair? | Go to Step 11 | -- | ||||
8 | If serviceable, replace the pivot pins. If not serviceable replace the steering column. Refer to Steering Column Replacement . Did you complete the repair? | Go to Step 11 | -- | ||||
9 | Replace the tilt spring. Did you complete the repair? | Go to Step 11 | -- | ||||
10 | Route the steering column wiring harness to the correct location. Did you correctly rout the wiring harness? | Go to Step 11 | -- | ||||
11 | Operate the steering column tilt function in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
