Preliminary Procedure

1. Remove the front fascia. Refer to Front Bumper Fascia Replacement .
2. Remove the energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement .

1

Front Bumper Impact Bar Bolts (Qty: 8)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Load bar to locating hooks on bumper beam brackets. Drive right side upper outboard bolt/screw, then drive left side upper outboard bolt/screw, then drive remaining bolt/screws in any sequence.

Tighten
25 N·m (18 lb ft)

2

Front Bumper Impact Bar