Preliminary Procedures

1. Open the rear compartment lid in order to access the rear auxiliary tail lamp assembly nuts.
2. Remove the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

1

Rear Auxiliary Turn Signal Lamp Assembly Nut (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Check to ensure the outer tail lamp bracket is secure.

Tighten
10 N·m (89 lb in)

2

Rear Auxiliary Turn Signal Lamp Assembly

Procedure

1. Disconnect the electrical bulb socket for the auxiliary turn signal.
2. Disconnect the electrical bulb socket for the back up lamp socket.
3. Remove the rear auxiliary turn signal lamp assembly from the rear compartment lid.