Tools Required

1. Install the J 28467-B and J-28467-501 to the vehicle.
2. Install the radiator shelf tube J 28467-2A on top of the strut tower tube J 28467-3 over the rear engine lift bracket.



3. Install the round tube of the front support assembly J 28467-4A through the large hole in the radiator shelf tube, J 28467-2A. The hole used in the radiator shelf tube J 28467-2A depends on the vehicle application.
4. Place the rubber padded foot of the front support assembly J 28467-4A on the upper tie bar.
5. Install the 7/16 in x 2.0 in quick release pin J 28467-9 through the hole in the front support assembly J 28467-4A in order to level the radiator shelf tube J 28467-2A.



6. Install the cross bracket assembly J 28467-1A.
7. Hand tighten the cross bracket assembly J 28467-1A wing nuts.



8. Install the lift hook J 28467-7A through the front engine lift hook bracket. Ensure the hook does not damage the surrounding components.



9. Install the lift hook J 28467-7A through the rear engine lift hook bracket. Ensure the hook does not damage the surrounding components.
10. Hand tighten the lift hook wing nuts J 28467-34 securely to remove all slack from the engine support fixture assembly.