Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the right front wheelhouse panel liner. Refer to Front Wheelhouse Liner Replacement .
2. Drain the washer solvent into a suitable clean container.
3. Disconnect the electrical connector at the windshield washer level sensor switch.

1

Level Sensor Switch Electrical Connector

2

Windshield Washer Level Sensor Switch

Tip

1. Use two flat-bladed tools and pry outward in order to release the level sensor from the washer solvent container grommet.
2. Discard the old level sensor switch grommet.
3. Install a new grommet into the washer solvent container prior to installing the new level sensor switch.
4. Lubricate the new grommet with straight concentrate washer fluid.