Callout
| Component Name
|
Preliminary Procedures
- Remove the right front wheelhouse panel liner. Refer to
Front Wheelhouse Liner Replacement
.
- Remove the washer pump hose from the pump and drain the washer solvent into a suitable clean container.
- Disconnect the electrical connector from the windshield washer solvent level sensor switch and washer pump.
|
1
| Windshield Washer Container Assembly Nuts (Qty: 2)
Notice: Refer to Fastener Notice in the Preface section.
Tip Tighten the nuts in sequence as shown.
Tighten 6 N·m (53 lb in) |
2
| Windshield Washer Container Assembly Nut
Tip Tighten the nut in sequence as shown.
Tighten 6 N·m (53 lb in) |
3
| Windshield Washer Solvent Container Hose Assembly
|
4
| Washer Hose Retainers (Qty: 2)
|
5
| Windshield Washer Solvent Container
Tip Ensure the mounting tabs are flush to the rail by holding the container firmly against the rail and finger tighten the nuts upon assembly. |