Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Steering Wheel and Column Description and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that noise is present in the steering column during operation. Is noise present in the steering column during operation? | Go to Step 3 | System OK |
3 | Inspect the steering column components for looseness. Is the steering column components loose? | Go to Step 8 | Go to Step 4 |
4 | Inspect the SIR coil for noise. Is the SIR coil noisy? | Go to Step 9 | Go to Step 5 |
5 | Inspect the horn contact ring for lubrication. Is the horn contact ring lubricated? | Go to Step 6 | Go to Step 10 |
6 | Inspect the lock plate retaining ring for the correct installation. Is the lock plate retaining ring installed properly? | Go to Step 7 | Go to Step 11 |
7 | Inspect the steering column coupling for looseness. Is the steering column coupling loose? | Go to Step 12 | Go to Step 3 |
8 |
Notice: Refer to Fastener Notice in the Preface section. Tighten the steering column components to specifications. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 13 | -- |
9 | Replace the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement . Did you complete the repair? | Go to Step 13 | -- |
10 | Lubricate the horn contact ring. Did you complete the repair? | Go to Step 13 | -- |
11 | Install the lock plate retaining ring properly. Did you complete the repair? | Go to Step 13 | -- |
12 | Tighten the steering column coupling to specifications. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
