GM Service Manual Online
For 1990-2009 cars only

Object Number: 1685480  Size: MF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Transmission Control Module (TCM)

Tip

    • Disconnect the TCM electrical connector.
    • A new TCM requires programming. Refer to Transmission Control Module Programming and Setup .
    • It is recommended that transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM), powertrain control module (PCM) or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values.
    • Twisting or tilting of the transmission control module electrical connector while disconnecting may result in bent or misaligned electrical terminal pins.

2

TCM Bracket Nuts (Qty: 2)

Tighten
10 N·m (89 lb in)

3

TCM Bracket

Refer to Control Module References for programming and setup information.