Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Rear License Plate Lamp Screws (Qty: 4)

Tighten
2 N·m(18 lb in)

2

Rear License Plate Lamp Lens (Qty: 2)

Tip
Push the lens forward then pull outward from the rear bumper fascia opening.

3

License Plate Lamp Socket

Tip
Twist the lamp socket electrical connector counterclockwise and remove from the lens.

4

Rear License Plate Lamp Bulb (Qty: 2)

Tip
Pull the bulb straight from the socket.