Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove either the LF or RF wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
3. Disconnect the fog lamp bulb socket electrical connector.

1

Front Fog Lamp Adjuster Screw

1. Remove the adjuster screw from the fog lamp bracket and lamp assembly.
2. Count the number of turns when removing the adjuster screw for a reference upon installation.
3. Aim the fog lamps after installation. Refer to Fog Lamp Aiming .

2

Front Fog Lamp Screws (Qty: 2)

Tighten
2 N·m (18 lb in)

3

Front Fog Lamp Assembly

Tip
Remove the lamp assembly from the fog lamp bracket.

4

Front Fog Lamp Bulb

Caution: Refer to Halogen Bulb Caution in the Preface section.

Tip
Turn the bulb socket counterclockwise and remove from the lamp assembly.