1

Rear Compartment Lid Nameplate (BUICK)

Tip

1. Use masking tape to protect the painted surface around the emblem/nameplate prior to removal.
2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from rear compartment lid, then wipe surface dry with a clean lint-free towel prior to installing the new nameplate.
4. Apply the new nameplate with the rear compartment lid in the closed position.
5. Apply pressure to the nameplate to ensure full adhesion is made to the rear compartment lid.

2

Rear Compartment Lid Emblem (CX)

Tip

1. Use masking tape to protect the painted surface around the emblem/nameplate prior to removal.
2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Use a J 25070 or equivalent to remove the old emblem. Clean all adhesive from rear compartment lid, then wipe surface dry with a clean lint-free towel prior to installing the new emblem.
4. Apply the new emblem with the rear compartment lid in the closed position.
5. Apply pressure to the emblem to ensure full adhesion is made to the rear compartment lid.

3

Rear Compartment Lid Nameplate (Tri-Shield)

Tip

1. Use masking tape to protect the painted surface around the emblem/nameplate prior to removal.
2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from rear compartment lid, then wipe surface dry with a clean lint-free towel prior to installing the new nameplate.
4. Apply the new nameplate with the rear compartment lid in the closed position.
5. Apply pressure to the nameplate to ensure full adhesion is made to the rear compartment lid.

4

Rear Compartment Lid Emblem (Lucerne)

Tip

1. Use masking tape to protect the painted surface around the emblem/nameplate prior to removal.
2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Use a J 25070 or equivalent to remove the old emblem. Clean all adhesive from rear compartment lid, then wipe surface dry with a clean lint-free towel prior to installing the new emblem.
4. Apply the new emblem with the rear compartment lid in the closed position.
5. Apply pressure to the emblem to ensure full adhesion is made to the rear compartment lid.