Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Position the window approximately half way down in the door.
2. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Remove the rear door window. Refer to Rear Side Door Window Replacement .

1

Rear Door Window Regulator Bolts (Qty: 3)

Tighten
10 N·m (89 lb in)

2

Rear Door Window Regulator Bolts (Qty: 2)

Tighten
10 N·m (89 lb in)

3

Rear Door Window Regulator

Tip

1. Disconnect the electrical connector.
2. Rotate the regulator as necessary to remove from the door.