Caution: Refer to SIR Caution in the Preface section.

Preliminary Procedures

1. Place the door window in the service position.
2. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the outside rearview mirror. Refer to Power Mirror Replacement.

1

Front Door Window Upper Reveal Molding Rivets (Qty: 7)

Procedures

1. Apply masking tape to the door frame and applique.
2. Pull the window run channel weatherstrip out of the retainer and reposition it in order to access to the rivets.
3. Drill out the 4 mm (5/32 in) rivets along the inside edge of the window channel retainer.

2

Front Door Window Upper Reveal Molding Retainer

Procedure

Located at the front lower corner of the door frame.

3

Front Door Window Upper Reveal Molding

Procedure

Inspect the window for proper operation.