GM Service Manual Online
For 1990-2009 cars only

Object Number: 1596337  Size: SF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling .
  2. Remove the front seats. Refer to Driver and Passenger Seat Replacement .
  3. Remove the seat back cushion finish panel. Refer to Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement .
  4. Remove the head restraint. Refer to Front Seat Head Restraint Replacement .
  5. Remove the head restraint guides. Refer to Front Seat Head Restraint Guide Replacement .
  6. Remove the inflatable restraint front seat side module. Refer to Driver and Passenger Seat Side Inflatable Restraint Module Replacement .
  7. Remove the seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  8. Remove the seat back side outer cover.
  9. Remove the seat back side inner cover.

1

Sensor, Seat Recliner Position

Tip
Slide out the seat pivot rod out of the seat position sensor and recliner motor.

2

Bolt, Seat Recliner Motor (Qty: 2)

Tighten
9 N·m (80 lb in)

3

Motor, Seat Recliner