The front inside door handle bezel has electrical connectors, the rear does not.

1. Insert a flat bladed tool (3) behind the forward edge of the door handle bezel (2).
2. Gently pry the bezel away from the door trim panel.



3. Pull the door handle (2) about half way open.
4. Pull the bezel (4) forward over the inside door handle.
5. Disconnect the electrical connector.

1. Connect the electrical connectors, if any, to the inside door handle bezel (4).
2. Pull the door handle (2) about half way open.
3. Slide the inside door handle (2) through the opening in the door handle bezel (4).
4. Insert the tabs at the rear of the bezel behind the door trim panel.
5. Snap the front of the door handle bezel (4) into place.