GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 LeSabre 🢒 Body and Accessories 🢒 Frame and Underbody 🢒 Air Cleaner Inlet Duct Replacement

Removal Procedure

    Object Number: 55463 Size: SH
  1. Loosen the intake air duct clamps.
  2. Remove intake duct from air cleaner and rotate duct upwards.
  3. Remove the inlet snorkel by pulling upwards and inboard.

Installation Procedure

    Object Number: 55463 Size: SH
  1. Install the intake air duct on the throttle body.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Rotate the intake air duct down and install the intake air duct onto the air cleaner.

    3. Tighten
    Tighten the air cleaner duct clamps to 2 N·m (18 lb in).