For 1990-2009 cars only
Removal Procedure
- Pull downward the front and rear door weatherstrips (1) in order to remove the center pillar garnish moldings.
- Pull outward the center pillar garnish molding (2) in order to release the retainers securing the center trim to the body.
- Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
- Remove the rear finish shrouds.
- Pull upward the carpet retainer (3) in order to release the retainer from the floor support clips.
- Carefully slide the shoulder belt through the opening in the carpet retainer.
- Remover the carpet retainer (3).
Installation Procedure
- Slide the shoulder belt through the opening in the carpet retainer.
- Align the carpet retainer (3) to the floor support clips.
- Apply downward pressure to the carpet retainer in order to secure the retainer to the support clips.
- Install the rear finish shrouds.
- Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
- If the retainer clips on the center pillar garnish molding are damaged or broken, replace, do not reuse.
- Install the center pillar garnish molding (2).
- Push inward at the top and bottom in order to secure.
- Install the front and rear door weatherstrips (1) while applying pressure to the strips in order to secure.
