| Table 1: | Radio Scan Tool Data Parameters |
| Table 2: | Radio Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Antenna Signal | -- | Varies | The scan tool displays 0-300. The signal from the antenna is measured in dBuV. |
Band Number | -- | Varies | The scan tool displays AM/FM1/FM2/XM1/XM2. This is the current band setting. |
CD Changer | -- | Connected | The scan tool displays Connected or Not Connected. This is the status of the CD changer. |
CD Focus Errors | -- | Varies | The scan tool displays 0-999. This is the number of CD focus errors the radio has recorded. |
CD Inserted | -- | Varies | The scan tool displays Yes/No. It will display Yes if a CD is recognized in the radio. |
CD Load/Unload Errors | -- | Varies | The scan tool displays 0-999. This is the number of CD loading and unloading errors the radio has recorded. |
CD Tracking Errors | -- | Varies | The scan tool displays 0-999. This is the number of CD tracking errors the radio has recorded. |
Driver Number | -- | Driver 1 (Driver 2 if the memory 2 button has been activated) | The scan tool displays Unknown, Driver 1-2. This is the memory position the driver has selected as received by Class 2 lines. |
New VIN Counter | -- | Varies | This numeric value increments each time the VIN is commanded to re-learn. |
Phone | -- | Varies | The scan tool displays Present or Not Present. This is the status of the phone. |
Preset Control | -- | Preset 1-6, if active radio station is a preset | The scan tool displays a preset number 1-6. This is the preset number when the radio is on a preset station. |
Single CD Track Number | -- | Varies | The scan tool displays the current track number on the CD. |
Source | -- | Varies | The scan tool displays Audio Off, Tuner, CD, ICDX, XM, CD Changer, MD Changer, Single MD Player, Nav Voice Stereo, Enhanced Stereo, AD Stereo, Phone Mono, Nav Voice Mono, Enhanced Mono, Ad Mono or Phone Stero. this indicates the source of the audio signal currently being output. |
Theft Armed | -- | Varies | The scan tool displays Yes/No/Learned VIN Number. The scan tool displays Yes when the theft mode has been turned ON by recognizing a valid VIN #. |
Theft Lock | -- | Unlocked | The scan tool displays Yes/No. The scan tool displays Yes when the radio receives the incorrect VIN number from the PCM across Class 2 lines. |
Total CD Hours | -- | Varies | The scan tool displays 0-999 hrs. This is the total number of hours the CD player has been used. |
Output Control | Description |
|---|---|
AM Pass A Stopping | This output control decreases the seek/scan radio stations. |
Chime Level | This output control increases the chime volume level. |
Country Code | This output control allows you to change country settings. |
FM Pass A Stopping | This output control decreases the seek/scan radio stations. |
Left Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Left Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Loud Amp Chime Volume | This output control allows you to change the voltage of the chime volume. |
Loud Chime Volume | This output control allows you to change the voltage of the chime volume. |
Normal Amp Chime Volume | This output control allows you to change the voltage of the chime volume. |
Normal Chime Volume | This output control allows you to change the voltage of the chime volume. |
Radio Setup | This output control allows you to setup a new or existing radio. |
Right Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Tuner Calibration | This output control allows you to calibrate the tuner setting from its default setting normal, to distance or local. |
