GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2008 🢒 LaCrosse 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T65-E 🢒 Transmission Control Replacement

Removal Procedure
  1. Remove the console. Refer to Front Floor Console Replacement.
  2. Remove the console wiring harness.
  3. Disconnect the console shift control wiring harness.
  4. Remove the automatic transaxle range selector cable from the control assembly. Refer to Range Selector Lever Cable Replacement.

    5. Object Number: 161200 Size: SH
  5. Remove the console shift control retaining nuts.
  6. Remove the console shift control assembly from the vehicle.

Installation Procedure

    Object Number: 161200 Size: SH
  1. Install the console shift control into the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the console shift control retaining nuts.

    3. Tighten
    Tighten the console shift control retaining nuts to 24 N·m (18 lb ft).

  3. Install the automatic transaxle range selector cable to the control assembly. Refer to Range Selector Lever Cable Replacement.
  4. Connect the console shift control wiring harness.
  5. Install the console. Refer to Front Floor Console Replacement.