GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2008 🢒 LaCrosse 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure

    Object Number: 177084 Size: SH
  1. Remove the left side instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Remove the left carpet retainers. Refer to Center Pillar Lower Trim Panel Replacement .
  3. Disconnect the electrical connector from the switch.
  4. Remove the mounting screw.
  5. Remove the parking brake indicator switch (1).

Installation Procedure

    Object Number: 177084 Size: SH
  1. Install the parking brake indicator switch (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the mounting screw.

    3. Tighten
    Tighten the mounting screw to 3 N·m (26 lb in).

  3. Connect the electrical connector to the switch.

    4. Check the operation of the switch.

  4. Install the left carpet retainers. Refer to Center Pillar Lower Trim Panel Replacement .
  5. Install the left side instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side.