Preliminary Procedures

1. Disable the supplementary inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
2. Remove the garnish molding windshield. Refer to Windshield Pillar Garnish Molding Replacement .
3. Remove the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
4. Remove the upper rear quarter trim panel. Refer to Quarter Lower Rear Trim Panel Replacement .
5. Remove the rear quarter window shelf. Refer to Rear Window Shelf Trim Panel Replacement .
6. Remove the headliner assembly. Refer to Headlining Trim Panel Replacement .

1

Restraint Roof Rail Module Bolt (Qty: 7)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Restraint Roof Rail Module Connector

3

Inflatable Roof Rail Module

Tip
If the air bag had a DTC, and must be returned for warranty, refer to Inflator Module Handling and Scrapping .