GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 LaCrosse 🢒 Engine 🢒 Engine Mechanical - 3.6L 🢒 Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust

Removal Procedure
  1. Turn the ignition OFF.

    2. Object Number: 1285242 Size: SH
  2. Remove the camshaft position (CMP) sensor electrical connector.

    3. Object Number: 1285243 Size: SH
  3. Remove the CMP sensor bolt.
  4. Remove the CMP sensor.

Installation Procedure

    Object Number: 1285243 Size: SH
  1. Install the CMP sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the CMP sensor bolt.

    3. Tighten
    Tighten the CMP sensor bolt to 10 N·m (89 lb in).


    Object Number: 1285242 Size: SH
  3. Install the CMP sensor electrical connector.