Audio System Transceiver Module Replacement. Buick Enclave

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2009 🢒 Enclave - AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Audio System Transceiver Module Replacement

Audio System Transceiver Module Replacement U42

Callout	Component Name
Preliminary Procedure Remove the video display assembly. Refer to Video Display Replacement .
1	Roof Console Assembly Refer to Roof Rear Console Replacement .
2	Audio System Transceiver Module Assembly Procedure Disconnect the electrical connector. Use a flat bladed tool to release the tabs that secure the module to the roof console on each side of the module. Slide forward and up to release from the roof console.

Callout

Component Name

Remove the video display assembly. Refer to Video Display Replacement .

Roof Console Assembly

Audio System Transceiver Module Assembly

Disconnect the electrical connector.
Use a flat bladed tool to release the tabs that secure the module to the roof console on each side of the module.
Slide forward and up to release from the roof console.

Callout	Component Name
Preliminary Procedure Remove the video display assembly. Refer to Video Display Replacement.
1	Roof Console Assembly Refer to Roof Rear Console Replacement.
2	Audio System Transceiver Module Mounting Bracket Screw (Qty: 3) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
3	Audio System Transceiver Module Mounting Bracket
4	Audio System Transceiver Module Assembly Procedure Disconnect the electrical connector. Use a flat-bladed tool to release the tabs that secure the module to the bracket on each side of the module. Slide out to release the module from the bracket.