Checks
| Causes
|
Case Assembly (51)
|
| • | Inspect for cracked or broken Case (51) |
| • | Inspect for stripped or sheared splines |
| • | Inspect for missing Lube Orifice Plug |
| • | Inspect for binding Manual Shift Detent Lever Assembly (511) |
| • | Inspect for missing Manual Shift Shaft Pin (510) |
| • | Inspect for interference or binding Park Pawl Actuator Assembly (509) |
| • | Inspect for disengaged or broken 1-2-3-4 Clutch Piston Spring Retainer (459) |
|
Torque Converter
|
| • | Inspect for stripped or sheared splines on Turbine Shaft |
| • | Inspect for missing bolts from Torque Converter to Flywheel |
|
35R/456 Housing Assembly
|
| • | Inspect for damaged or broken Input Shaft Thrust Bearing Assembly (32) |
| • | Inspect for stripped, sheared or loose splines on the Input Shaft to the 3-5 Reverse/4-5-6 Clutch Housing (422) |
|
Oil Pump Assembly
|
| • | Inspect for fluid leaks / improper fluid level |
| • | Inspect for disengaged, worn, binding or failed Drive Sprocket (216), Driven Sprocket (215) or Drive Link (217) |
| • | Inspect for leaking Fluid Outlet Seal Assembly (57) |
| • | Inspect for damaged or worn Drive (219, 220) and Driven Sprocket Thrust Washers (214) |
| • | Inspect for loose or missing Oil Pump Bolts (204) |
| • | Inspect for stripped or sheared splines on the Oil Pump Shaft or Driven Sprocket (215) |
| • | Inspect for damaged, clogged or improperly installed Oil Filter Assembly (201) |
| • | Inspect for damaged or leaking Oil Filter Neck Seal (202) |
|
Low & Reverse Clutch Assembly (455)
| Inspect for stripped or sheared splines to the Reaction Carrier (467)
|
Input Carrier Assembly (470)
|
| • | Inspect for stripped or sheared splines to ring gear |
| • | Inspect for improperly installed carrier pinion gear pins |
|
