GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2008 🢒 Enclave 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Engine Oil Pressure Sensor and/or Switch Replacement

Special Tools

J 41712 Oil Pressure Switch Socket

Removal Procedure

    Object Number: 1832048 Size: SH
  1. Turn the ignition OFF.
  2. Disconnect the oil pressure sensor electrical connector.
  3. Remove the oil pressure sensor (1).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1832048 Size: SH
  1. Install the oil pressure sensor (1).

    2. Tighten
    Tighten the oil pressure sensor to 20 N·m (15 lb ft).

  2. Connect the oil pressure sensor electrical connector.