GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 241616  Size: SH
  1. Disconnect the electrical connector from the fluid level sensor (1).

  2. Object Number: 176836  Size: SH
  3. Remove the fluid level sensor (1). Use needle nose pliers in order to compress the switch locking tabs at the outboard side of the master cylinder.

Installation Procedure


    Object Number: 241616  Size: SH
  1. Install the fluid level sensor (1) until the locking tabs snap into place.
  2. Connect the electrical connector to the fluid level sensor (1).