Removal Procedure
- Remove the adjuster track
covers. Refer to
Front Seat Adjuster Track Finish Cover Replacement
.
- Move the seat forward to between the mid-position and full
forward and also the full-up position.
- Remove the headrest. Refer to
Front Seat Head Restraint Replacement
.
- Remove the seat adjuster to floor pan bolts.
- Tip the seat forward and remove the front seat retractor side
belt nut from the front seat. Refer to the following procedures:
- Remove the power seat electrical connector, if equipped.
- Tip the seat forward to remove it from the front hook attachments.
- Remove the seat from the vehicle.
Installation Procedure
- Position the front seat
in the vehicle.
- Tip the seat forward and engage the front hook attachments.
- Install the seat belt to the front seat track. Refer to the following
procedures:
- Install the power seat electrical connector, if equipped.
- Snap the track covers onto the adjusters. Refer to
Front Seat Adjuster Track Finish Cover Replacement
.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install
the seat adjuster to floor pan bolts.
Tighten
Tighten the adjuster to floorpan bolts to 24 N·m (18 lb ft).
- Move the seat to its original position.
- Install the headrest. Refer to
Front Seat Head Restraint Replacement
.
