Power Steering Fluid Reservoir Inlet Hose Replacement LY7

1. Remove the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement .
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
3. Place drain pans under the vehicle as needed.



4. Loosen the power steering reservoir inlet hose clamp (1) and disconnect the power steering reservoir inlet hose (2) at the power steering cooler hose.



5. Loosen the power steering reservoir inlet hose clamp (1) and disconnect the power steering reservoir inlet hose (2) at the remote power steering fluid reservoir.
6. Remove the power steering reservoir inlet hose from the vehicle.

1. Install the power steering reservoir inlet hose to the vehicle.



2. Connect the power steering reservoir inlet hose (2) and release the power steering reservoir inlet hose clamp (1) in place at the remote power steering fluid reservoir.



3. Connect the power steering reservoir inlet hose (2) and release the power steering reservoir inlet hose clamp (1) in place at the power steering cooler hose.
4. Clean any excess fluid from the vehicle and remove any drain pans.
5. Fill and bleed the power steering fluid system. Refer to Power Steering System Bleeding .
6. Install the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement .