GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1203709  Size: SH
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  2. Remove the rear seat back. Refer to Rear Seat Back Replacement.
  3. Remove the lower pillar trim panel. Refer to Lower Pillar Garnish Molding Replacement.
  4. Remove the left rear quarter lower panel. Refer to Quarter Lower Rear Trim Panel Replacement.
  5. Remove the left rear upper quarter trim panel. Refer to Quarter Upper Trim Panel Replacement.
  6. Lower the rear of the headliner. Refer to Headlining Trim Panel Replacement.
  7. Disconnect the antenna cable (2) from the radio antenna module.
  8. Remove the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement.
  9. Adjust the carpet for access to the antenna cable (1) and body harness as required. Refer to Front Floor Panel Carpet Replacement.

  10. Object Number: 929251  Size: SH
  11. Remove the left instrument panel (I/P) compartment access hole cover.
  12. Disconnect the antenna cable from the antenna extension cable.
  13. Cut off the visible ends of the antenna cable from the wiring harness in the following locations:
  14. • The kick panel area
    • The rear header area

Installation Procedure


    Object Number: 929251  Size: SH
  1. Install the antenna cable to the vehicle. Use electrical tape in order to secure the antenna cable to the top of the wiring harness. Secure the cable to the harness at least every 150 mm (6 in).
  2. Connect the antenna cable to the antenna extension cable.
  3. Install the left I/P compartment access hole cover.
  4. Install the carpet. Refer to Front Floor Panel Carpet Replacement.
  5. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement.

  6. Object Number: 1203709  Size: SH
  7. Connect the antenna cable (2) to the radio antenna module
  8. Install the headliner. Refer to Headlining Trim Panel Replacement.
  9. Install the left rear upper quarter trim panel. Refer to Quarter Upper Trim Panel Replacement.
  10. Install the left rear quarter lower panel. Refer to Quarter Lower Rear Trim Panel Replacement.
  11. Install the lower pillar trim panel. Refer to Lower Pillar Garnish Molding Replacement.
  12. Install the rear seat back. Refer to Rear Seat Back Replacement.
  13. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.