Preliminary Procedures

Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .

1

Seat Recliner Handle

Refer to Driver or Passenger Seat Recliner Handle Replacement .

2

Seat Adjuster Finish Cover

Refer to Front Seat Adjuster Track Finish Cover Replacement .

3

Seat Cushion Cover

Refer to Front Seat Cushion Cover Replacement .

4

Seat Cushion Heater Assembly

Procedure

Disconnect the electrical connector.

5

Seat Cushion Pad

6

Seat Cushion Bolt (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (18 lb ft)

7

Seat Cushion Frame Assembly

Procedure

1. Disconnect and remove the seat wiring harness as required.
2. If working on the passenger seat re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .