Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Cap, Wiper Arm (Qty: 2)

2

Nut, Wiper Arm (Qty: 2)

Tighten
25 N·m (18 lb ft)

3

Wiper Arm, Wiper Arm Assembly

Important: Use the J 39637 to remove the wiper arm from the wiper arm drive spindle.

4

Wiper Blade Assembly

Important: Keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to contact the metal spline of the wiper blade element.

Tip
To replace element, remove the bottom claws of the wiper blade element from the notches in the element of the wiper blade.