1

Hood Open Assist Rod Assembly (Qty: 2)

Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Tip

1. Remove the metal clip at the ends of the assist rod, then pull away from stud.
2. Disconnect any electrical connectors.

2

Hood Hinge Bolts (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
24 N·m (18 lb ft)

3

Hood Assembly