GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Digital Radio Antenna Cable Replacement

Removal Procedure

    Object Number: 1203709 Size: SH
  1. Remove the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  2. Lower the rear of the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  3. Disconnect the antenna cable (3) from the antenna base cable connector.
  4. Cut off the visible end of the antenna cable.

    5. Object Number: 1203693 Size: SH
  5. Adjust the left rear compartment trim panel for access.
  6. Disconnect the antenna cable from the digital radio receiver.
  7. Cut off the visible end of the antenna cable.

Installation Procedure

    Object Number: 1203693 Size: SH
  1. Install the new antenna cable to the retainers on the receiver bracket.
  2. Connect the antenna cable to the digital radio receiver.
  3. Route the antenna cable through the rear seat back pass through into the passenger compartment. Wrap the cable and harness with tape at the pass through to avoid abrasion and rattles.
  4. Secure the antenna cable to the wire harness in the rear compartment.
  5. Install the rear compartment trim panel.

    6. Object Number: 1203709 Size: SH
  6. Connect the antenna cable (3) to the antenna base cable connector.
  7. Secure the antenna cable to the wire harness.
  8. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  9. Install the rear window shelf trim panel . Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.