GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Engine 🢒 Engine Controls - 3.8L 🢒 Accelerator Pedal Position Sensor Replacement

Removal Procedure

    Object Number: 910941 Size: SH
  1. Remove the left instrument panel (I/P) sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  3. Remove the accelerated pedal bolts (2).
  4. Remove the accelerator pedal (1) from the vehicle.

Installation Procedure

    Object Number: 910941 Size: SH
  1. Position the accelerator pedal (1) to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the accelerator pedal bolts (2).

    3. Tighten
    Tighten the bolts to 5 N·m (44 lb in).

  3. Connect APP sensor electrical connector.
  4. Install the left I/P sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .