GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Engine 🢒 Engine Electrical 🢒 Crankshaft Balancer Removal

Tools Required

    • EN 46106 Flywheel Holding Tool
    • J 38416-2 Crankshaft Button
    • J 41816 Crankshaft Balancer Remover

    Object Number: 945978 Size: SH
  1. Install the EN 46106 through the starter mounting hole.

    2. Object Number: 1395946 Size: SH
  2. Remove the crankshaft balancer bolt.

    3. Object Number: 1395949 Size: SH
  3. Install the J 38416-2 in the nose of the crankshaft.
  4. Install the J 41816 in order to remove the crankshaft balancer.
  5. Tighten the center bolt of the J 41816 in order to pull the crankshaft balancer off of the crankshaft.
  6. Remove the J 41816 from the crankshaft balancer.