GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Engine 🢒 Engine Electrical 🢒 Engine Mount Strut Bracket Replacement - Left Side

Removal Procedure
  1. Drain the engine coolant from the cooling system. Refer to Cooling System Draining and Filling .
  2. Remove the engine coolant temperature sensor. Refer to Engine Coolant Temperature Sensor Replacement .

    3. Object Number: 327466 Size: SH
  3. Remove the engine mount strut at the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left Side and Engine Mount Strut Replacement - Right Side .

    4. Object Number: 35814 Size: SH
  4. Remove the engine mount strut bracket bolts.
  5. Remove the engine mount strut bracket.

Installation Procedure

    Object Number: 35814 Size: SH
  1. Install the engine mount strut bracket to the head.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the engine mount strut bracket bolts.

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).


    Object Number: 327466 Size: SH
  3. Install the engine mount strut to the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left Side and Engine Mount Strut Replacement - Right Side .
  4. Install the engine coolant temperature sensor. Refer to Engine Coolant Temperature Sensor Replacement .
  5. Fill the cooling system with engine coolant. Refer to Cooling System Draining and Filling .